At the heart of the MAG C410T-600 EVO III combo lies a feature-packed bass preamp with rotary bass, middle and treble controls, along with supplementary rotary controls providing 15dB of cut and boost at 220Hz and 1.6kHz. Additionally, front panel push switches for Bright and Deep settings provide instant access to attacking and warm, rounded sounds respectively and, on the subject of low-end response, the trademark Ashdown sub-harmonic generator is ready and able to deliver truck loads of earth moving tone if called upon.

With the MAGs now achieving EVO III status, the amplifier also includes a built-in compressor with precision sonic control. Along with the all new tube emulated drive control for that extra bit of grind with your tone.

Fueled by a potent 600W power section, C410T-600 EVO III combo features inputs for active and passive instruments, along with an effects send and return, a tuner/line output and a balanced DI output for direct connection to a mixing console.

The combo delivers its payload via 4 x 10" drivers, supplemented by a high-frequency tweeter for even greater top-end bite.

Specifications

Power Output 600 Watt
Power Requirement 115 - 230V
Speaker Outputs 2 x Jack Sockets  
Frequency Response -3dB at 17Hz and 30Khz
High Instrument Input Impedance 3.9m Ohms, input range 150mV - 20mV p-p
Low Instrument Input Impedance 10K Ohms, input range 300mV - 40V p-p
Line Input Impedance 10K Ohms, input level 0dBu nominal
Tuner Output  Impedance 22K Ohms, Level 0dBu nominal 
DI Output 600 Ohms balanced, Level -20dBu nominal 
Impedance Minimum 4 Ohm 
EQ

Bass +/-15dB @ 100 Hz Lo Mid +/- 15dB @ 220 Hz Middle +/-15dB @ 660Hz Hi Mid +/- 15dB 1.6 kHz Treble +/-15dB @ 7kHz shelving deep

Effects Send Impedance 22k Ohm, level 0dBu nominal 
Effects Return Impedance 22K Ohm, input level 0dBu nominal 
Signal to Noise Ratio 

Better than 80dB (EQ flat) 

Distortion  Less than 0.5% THD
H x W x D (mm)

768 x 610 x 355

Weight (kg) 44

 

Recently viewed