At the heart of the MAG C115-300 EVO III combo lies a feature-packed bass preamp with rotary bass, middle and treble controls, along with supplementary rotary controls providing 15dB of cut and boost at 220Hz and 1.6kHz. Additionally, front panel push switches for Bright and Deep settings provide instant access to attacking and warm, rounded sounds respectively and, on the subject of low-end response, the trademark Ashdown sub-harmonic generator is ready and able to deliver truck loads of earth moving tone if called upon.
With the MAGs now achieving EVO III status, the amplifier also includes a built-in compressor with precision sonic control. Along with the all new tube emulated drive control for that extra bit of grind with your tone.
Fueled by a potent 300W power section, MAG C115-300 EVO III combo features inputs for active and passive instruments, along with an effects send and return, a tuner/line output and a balanced DI output for direct connection to a mixing console.
The combo delivers its payload via a single 15" driver.
Specification
| Power Output |
300 Watts |
| Power Requirement |
230V |
| Speaker Outputs |
2 x Jack Sockets |
| Frequency Response |
-3dB at 17Hz - 30Khz |
| High Instrument Input |
Impedance 3.9m Ohms, input range 150mV - 20mV p-p |
| Low Instrument Input |
Impedance 10K Ohms, input range 300mV - 40V p-p |
| Line Input |
Impedance 10K Ohms, input range 300mV - 40V p-p |
| Tuner Output |
Impedance 22K Ohms, Level 0dBu nominal |
| DI Output |
600 Ohms balanced, level -20dBu nominal |
| Impedance |
8 Ohm |
| EQ |
Bass +/-15dB @ 100Hz Lo Mid +/-15dB @ 220Hz Middle +/-15dB @ 660Hz Hi Mid +/-15dB @ 1.6kHz Treble +/-15dB @ 7kHz shelving Deep +
|
| Effects Send |
Impedance 22k Ohm, level 0dBu nominal |
| Effects Return |
Impedance 22K Ohm, level 0dBu nominal |
| Distortion |
Less than 0.5% THD
|
| Signal to Noise |
Better than 80dB (EQ Flat) |
| H x W x D (mm) |
581 x 474 x 300
|
| Weight (kg) |
28 |
