RPM-1-B-Stock

£399.00
Loading reviews...
  • RPM-1-B-Stock

RPM-1-B-Stock

£399.00
Loading reviews...

Very rare unit - Well used, but fully tested, serviced at the factory and sounding great.

For those wishing to configure their own rack-mounting bass rigs, the Ashdown RPM-1 EVO II preamp puts all the ABM facilities in a convenient rack-mounting package. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out, and flat/shaped by footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting. A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones. Also footswitchable is the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower.

 A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone. The ABM RPM-1 EVO II features a balanced DI out with pre or post EQ switching, a sub-bass output, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. The addition of a high-precision crossover with variable frequency from 35Hz to 160Hz and a level control for the low-pass output, enables the configuration of sophisticated bi-amped systems, in which the bass and mid/high frequencies are amplified separately.

Specification


Power Output 600W Power Requirement 115/230V Power Requirements 115/230V Speaker Outputs Minimum impedance 4 Ohms Frequency Response -3dB at 17Hz and 30kHz High Instrument Input Impedance 3.9M Ohms, Input range 150mV - 20mV p-p Low Instrument Input Impedance 10k Ohms / Input range 300mV - 40V p-p Line Input Impedance 22k Ohms, input level 0dBu nominal Sub Output Impedance 1k Ohms, level 0dBu nominal DI Output 600 Ohms balanced, level 0dBu nominal Tuner Output

Impedance 22k Ohms, level 0dBu nominal

EQ Bass +/- 15dB @ 45Hz Middle +/- 15dB @ 660Hz Treble +/- 15dB @ 7kHz Effects send Impedance 22k Ohm, level 0dBu nominal Effects return Impedance 22k Ohm, Input level 0dBu nominal H x W x D (mm) 90 x 483 x 267 Weight (kg) 6

5 Year Warranty

We're so confident in our amplifiers, we offer a 5 year warranty on all new products.

Built for the road

Perfect for gigging musicians, our products are built to last.