Legacy Bass Amplification

EB LITE 15-220 EVO III 220W 1 x 15" bass combo

  •  
  • Extras
EB LITE 15-220 EVO III

Front view - Click to enlarge [+]

Ashdown Electric Blue bass amplifiers load the legendary Ashdown tone into an affordable pair of high-performance, high-value combo amps.

The EB LITE 15-220 1 x 15" combo uses a 220 Watt RMS fan-cooled, fast-transient power stage, and a fully-featured bass pre amp with inputs for both active and passive instruments. There’s also an illuminated VU meter, a 5 band EQ with Bright and Deep switches for total tonal control, a front panel-mounted balanced DI output for connection to a PA or recording console, plus an FX loop, a tuner/line output and lastly the classic Ashdown sub-harmonic generator.

The EB Lite 15-220 also includes a built-in compressor to provide an exceptional level of sonic control, especially for a bass amp of this size and cost.

A high-performance Ashdown 'Blueline' speaker ensures exceptional attack, clarity and low-end performance. The cabinet is finished in a tough, retro-style vinyl covering with metal protected corners.
Ashdown Electric Blue bass amplification loads legendary Ashdown tone into an affordable pair of high-performance, high-value combos.

The EB LITE 15-220 1 x 15" combo uses a 220 Watts RMS fan-cooled fast-transient power stage, and a fully-featured bass pre amp with inputs for both active and passive instruments, an illumunated VU meter, 5 band EQ with Bright and Deep switches for total tonal control, a front panel-mounted balanced DI output for connection to a PA or recording console, an FX loop, a tuner/line output and the classic Ashdown sub-harmonic generator.

Consistent with its EVO III status, the combo also includes a built-in compressor to provide an exceptional level of sonic control for a bass amp of this size and cost.

A high-performance Ashdown 'Blueline' speaker ensures exceptional attack, clarity and low-end performance. The cabinet is finished in a tough, retro-style vinyl covering with metal protected corners.

EB LITE 15-220 EVO III Specifications

Power Output 220 Watt
Power Requirement 115-230 Volts
Speaker Configuration 1 x 15
Frequency Response -3dB @ 33Hz und 25KHz
High Instrument Input impedance 3.9m Ohms, input range 150mV - 20mV p-p
Low Instrument Input impedance 10k Ohms, input range 300mV - 40V p-p
Line Input impedanz 22k Ohm, input level 0dBu nominal
DI Output 600 Ohm balanced / Level -20dBu nominal
Tuner Output impedance 22k Ohms / Level 0dBu nominal
Output Impedance Minimum 4 Ohm
Signal to noise Better than 80dB (EQ flat)
EQ Bass +/-15dB @ 100Hz Lo Mid +/-15dB @ 220Hz Middle +/-15dB @ 660Hz Hi Mid +/-15dB @ 1.6kHz Treble +/-15dB @ 7kHz shelving Deep +
Effects Send Impedance 22k Ohm / Level 0dBu nominal
Effects Return Impedance 22k Ohm / Level 0dBu nominal
Distortion Less than 0.5% THD
H x W x D (mm) 581 x 474 x 300
Weight (kg) 26